BORGESON STEERING COUPLER – UNIV Steering Shaft Coupler – 315249

Coupler 3/4in DD x 1in DD Steel


SKU BLCC315249
Part Number 315249
Add to wishlist Add to compare


Steering Shaft Coupler; Universal; 1 Inch DD X 3/4 Inch DD; Steel; Single

A U-joint can sometimes be eliminated by using a 2 Inch straight extension, called a coupler, to extend either the steering box, RP shaft or the column shaft. The coupler can be welded and/or pinned to the un-splined end of a shaft. We offer shafts that are splined only on one end in 3 lengths:5 Inch, 16 Inch & 36 Inch. The 1 Inch- 48 & 1 Inch Double D couplers have a 1-1/4 Inch hole that will accept either an adapter to reduce inside diameter to 3/4 Inch smooth or another splined or 3/4 Inch Double D coupler. The coupler assembly would have to be pinned and/or welded together. Welding the coupler is acceptable because there are no moving parts to damage, & the coupler’s steel is less susceptible to heat damage from welding. Couplers are available in the same spline or double D sizes as our u-joints. Couplers & adapters are available in steel & stainless steel.

Compatibility: Borgeson Universal Steering
End Type 1: Double D
End Size 1: 1 Inch
End Type 2: Double D
End Size 2: 3/4 Inch
Color: Silver
Material: Steel
Quantity: Single

– A U-Joint Can Sometimes Be Eliminated By Using A Straight Extension, Called A Coupler, To Extend Either The Steering Box, RP Shaft Or The Column Shaft
– Couplers Have A Hole That Will Accept Either An Adapter To Reduce Inside Diameter Smooth Or Another Splined Or Double D Coupler
– Welding The Coupler Is Acceptable Because There Are No Moving Parts To Damage, & The Coupler’s Steel Is Less Susceptible To Heat Damage From Welding
– Limited 5 Year Warranty


Weight 0.77000 kg
Dimensions 4.10000 × 4.90000 × 1.50000 cm

Part Number