Description
Nitrous Oxide Controller; Progressive Solenoid Operation Based On Time/ RPM & TPS Input; With 2.4 Inch LCD Display
Nitrous oxide systems is proud to announce their new mini 2 stage progressive nitrous controller. Featuring two completely independent stages of nitrous control, each with its own throttle position activation switch & progressive ramps. It allows you to get the most out of your nitrous system & put more power to the ground when traction is at its best. Rpm on/off control eliminates the need for a window switch & allows you to turn the nitrous off & on at set points. It also features two programmable outputs, so you can control timing retard or other devices. With the hand held programmer, it makes programming quick & simple & allows you to mount the main box out of site.
Display Type: LCD
Data Memory Type: Micro SD Card Memory
– 2 Fully Independent Nitrous Controllers In One Small Bulletproof Case
– Hand Held Programmer For Ease In Programming
– Integrated Throttle Position Activation Switch Eliminates The Need For A Separate WOT Switch
– RPM On/ Off Control Eliminates The Need For A Separate Window Switch
– Solenoid Control Channels With A 40 Ampere Load Capacity For Large Solenoids
– Two Output Signals For Use With Timing Retards Or Activation Switches
– Delay Time Programmable From 0 To 9.9 Second Start Percentage Programmable From 0 To 99 Percent
– Ramp Time Programmable From 0 To 9.9 Second
– End Percentage Programmable From 0 To 99 Percent
– Limited 90 Day Supplier Warranty