Description
Cylinder Head Gasket; MLS; For Use With Vauxhall/Opel 1992-1997 Calibra Turbo/ 1987-1991 Kadett E 16 Valve/ 1993-1995 Vectra A Turbo 20XE/ C20XE/ C20LET; 88 Millimeter Bore; 3 Layer Stainless Steel; 0.051 Inch Compressed Thickness; Single
Provide maximum sealing performance for today’s high output engines & require no sealants. MLS gaskets are ideal for both aluminum heads to aluminum blocks & aluminum heads to cast iron blocks. They can withstand the shearing force created by the two materials. MLS gaskets have increased strength because they are comprised of multiple layers of stainless steel; which also creates the ability to rebound & resist corrosion. The outer layers are embossed & coated on both sides with Viton (a flouroelastomer rubber based material that is heat resistant to 250 Centigrade/ 482 Fahrenheit). Viton is designed to meet the demands of a variety of harsh sealing environments, load conditions, & surface finishes. The center or shim layer is uncoated stainless steel, which can be varied to accommodate multiple thickness requirements.
Engine Compatibility: Vauxhall L4 2.0L
Material: 3 Layer Stainless Steel
Bore Diameter: 3.46 Inch
Compression Thickness: 0.051 Inch
– Provide Maximum Sealing Performance For Today’s High Output Engines & Require No Sealants
– Ideal For Aluminum Heads To Aluminum Blocks & Aluminum Heads To Cast Iron Blocks Withstanding The Shearing Force Created By The Two Materials
– No Need To Re-Torque, The Embossing Design Of The MLS Gasket Promotes An Even Clamp Load Across The Sealing Surface Allowing For Measurable Reduced Bore Distortion
– Cometic MLS Gaskets Are Comprised Of Multiple Layers Of Stainless Steel Due To It’s Increased Strength, Ability To Rebound & Resistance To Corrosion
– The Outer Layers Of The Gaskets Are Embossed & Coated On Both Sides With Viton – A Flouroelastomer Rubber Based Material That Is Heat Resistant To 2500 Centigrade/ 482 Fahrenheit
– Viton Is Designed To Meet The Demands Of A Variety Of Harsh Sealing Environments, Load Conditions & Surface Finishes
– The Center Or Shim Layer Is A Uncoated Stainless Steel Layer Which Can Be Varied To Accommodate Multiple Thickness Requirements
