Description
RPM Activated Switch; Digital Window Switch; Accepts Input From Stock Inductive Ignitions/Tach Output From Ignition Controls/Tach Output From ECU/5 Volt Tach Signal; Programmable From 200 RPM To 15000 RPM In 100 RPM Increments
Are you looking for an RPM switch that will turn a circuit on, then off at a different RPM? How about one for your late model coil per cylinder ignition system? Or, something for your car with dual coil packs? Maybe one for a Viper or even a Harley Davidson? Look no further, our new digital RPM window switch will do it all! This switch will accept an input RPM signal from a coil negative terminal (For Stock Ignitions), a tach output from an ignition control, an ECU tach output or even a 5 Volt tach signal. Another great feature is that no RPM modules are needed! The RPM activation points are programmed by simply scrolling through the LED display to your desired RPM amounts. The switch has two outputs; one normally open, the other is normally closed. It can be programmed from 200 RPM to 15000 RPM in 100 RPM increments. It can be used with an input voltage of 9 to 18 Volts.
Type: Digital Window Switch
Adjustment Style: Push Button LED
Input: Stock Inductive Ignitions/ Tach Output From Ignition Controls/ Tach Output From ECU
RPM Increments: 100 RPM
RPM Range: 200 To 15000 RPM
– Will Accept An Input RPM Signal From A Coil Negative Terminal (For Stock Ignitions), A Tach Output From An Ignition Control, An ECU Tach Output Or Even A 5 Volt Tach Signal
– Great Feature Is That No RPM Modules Are Needed, The RPM Activation Points Are Programmed By Simply Scrolling Through The LED Display To Your Desired RPM Amounts
– Can Be Programmed From 200 RPM To 15000 RPM In 100 RPM Increments
– Can Be Used With An Input Voltage Of 9 To 18 Volts
– Limited 1 Year Warranty
