Exedy Clutch Set, Stage 1, 220 Millimeter Clutch Diameter, 26 Millimeter X 24 Spline Input Shaft, Diaphragm, 1538 Pound Static Pressure – 08800B
$437.35
Exedy Clutch Set, Stage 1, 220 Millimeter Clutch Diameter – 08800B
Description
Clutch Set; Stage 1; 220 Millimeter Clutch Diameter; 26 Millimeter x 24 Spline Input Shaft; Diaphragm; 1538 Pound Static Pressure; Single Disc/ Organic Friction Material; Full Face Design/ Sprung Hub; With Pressure Plate/ Clutch Disc/ Throwout Bearing/ Alignment Tool
Attributes:
- Input Shaft Size: 26 Millimeter X 24 Spline
- Pressure Plate Design: Diaphragm
- Disc Diameter: 220 Millimeter
- Number Of Friction Discs: 1 Disc
- Flywheel Weight: No Flywheel
- Flywheel Tooth Count: No Flywheel
- Disc Friction Material: Organic
- Disc Hub Design: Sprung
- Pressure Plate Clamp Load: 1538 Pound
- Pressure Plate Centrifugal Assist: No Centrifugal Assist
- Torque Holding Capacity: 297 Feet/Pound
- Pressure Plate Material: Iron
- Flywheel Material: No Flywheel
- Includes Throwout Bearing: Yes
- Includes Pilot Bearing: No
- Includes Alignment Tool: Yes
Features & Benefits:
- Organic Racing Clutches Uses Premium Friction Materials That Are Resistant To Slippage And Burst
- Increased Clamp Loads Give The Necessary Capacity To Handle Modified Engines
- Clutch Discs Have Spring Center Dampers To Reduce Drivetrain Shock
- Ideal Clutch For Street And Light Horsepower Track Use
- Drivability Is Similar To The Stock Clutch: Pedal Efforts Will Be Slightly Higher Because Of The Higher Clamp Loads
- All Of Our Stage 1 Clutch Discs Have Spring Center Dampers To Reduce Drivetrain Shock And Provide Smooth Clutch Engagement
- Clutch Covers Are Designed To Achieve A Clamping Load That Is Approximately 40 Percent Higher Than The Genuine Part Allowing A Higher Torque Transmitting Capacity
- Ultra-Fiber Organic Disc: Advanced Facing Material Provides The High Heat Resistance Essential For Motorsports
- All EXEDY Stage 1 Organic SFI 1.1 Certification
- Limited 1 Year Or 20,000 Mile Warranty
About Product:
EXEDY Stage 1 Organic Racing Clutches only use premium friction materials that are resistant to slippage and burst. Increased clamp loads give the necessary capacity to handle modified engines. This is the ideal clutch for street and light horsepower track use. Drivability is similar to the stock clutch. Pedal efforts will be slightly higher because of the higher clamp loads. All of our Stage 1 clutch discs have spring center dampers to reduce drivetrain shock and provide smooth clutch engagement.
Additional information
| Weight | 13.3 lbs |
|---|---|
| Dimensions | 13 × 12.25 × 3.5 in |
| Brand | EXEDY |
| Manufacturer Part Number | 08800B |
Vehicle Fitment
This part fits the vehicles listed below. Always confirm fitment for your exact vehicle before ordering.
This part is compatible with 66 vehicles.
| Year | Make | Model | Trim | Engine | Notes |
|---|---|---|---|---|---|
| Loading fitment... | |||||
Related products
-
Crown Automotive Clutch Pedal Adjustment Activation Switch, Plastic/Nylon, Black, Mounts on the Clutch Master Cylinder Rod – 56009047
Vehicle-Specific Part: Check Fitment $73.94 Add to cart Quick View -
Crown Automotive Differential Pinion Yoke, OEM Replacement, Chrysler 8-1/4 Inch Axle, 3 Inch Length – 52068839
Vehicle-Specific Part: Check Fitment $83.46 Add to cart Quick View -
Crown Automotive Drive Shaft Boot, Single – 5083001AA
Vehicle-Specific Part: Check Fitment $16.14 Add to cart Quick View -
Crown Automotive Transfer Case Output Shaft Seal, NP231 Transfer Case – 4798112
Vehicle-Specific Part: Check Fitment $13.50 Add to cart Quick View