Fabtech Lift Kit Suspension, 3 Inch Front Lift, 3 Inch Rear Lift – K7091DL
$4,221.65
Fabtech Lift Kit Suspension, 3 Inch Front Lift, 3 Inch Rear Lift – K7091DL
Description
Lift Kit Suspension; 3 Inch Front Lift; 3 Inch Rear Lift; With Front Dirt Logic Remote Reservoir Coil Overs And Rear Dirt Logic Shock Absorbers In Kit; Black Components; With Rear Air Bag Spacers/ Front Upper Control Arms/ Installation Hardware
Attributes:
- Front Lift Amount (IN): 3 Inch
- Rear Lift Amount (IN): 3 Inch
- Maximum Tire Size: 35 x 12.50
- Front Lift Type: Control Arm
- Rear Lift Type: Air Bag Spacer
- Shock Type: Nitrogen Gas Charged
- Wheel Backspacing (IN): 5
- Minimum Wheel Diameter: 18
- Shocks: With Front Dirt Logic Remote Reservoir Coil Overs And Rear Dirt Logic Shock Absorbers
- Color: Black Components/ Silver Shocks
Features & Benefits:
- Arms Eliminate The Upper Ball Joint With Super Strong 1 Inch ID Stainless American Uniball
- Chromoly Tubing Reduces Flex Found In Stock Arms For More Positive Road Feel
- 17-4 Stainless Steel Heat Treated Uniball Pin Fits Into Factory Ball Joint Taper Without Modification To The Spindle
- Front Dirt Logic 2.5 Coilovers
- Perfect System For The Daily Driver That Wants Increased Clearance To Run 33 Inch Or 35 Inch Tires
- Limited Lifetime Warranty
About Product:
Fabtech’s high quality Tundra lift kit offers increased height to run 33 Inch or 35 Inch tall tires with additional front suspension strength. This kit helps level the vehicle stance front to rear for a more aggressive appearance. The factory Tundra upper control arms are replaced with Fabtech’s Uniball Upper Control Arms that provide an extra degree of caster compared to stock arms. The increased caster helps to balance steering effort with oversized tires. The Fabtech upper control arms are constructed of the finest material with 0.120 Inch wall 1-1/4 Inch Outer Diameter 4130 Chromoly steel tubing. High quality 1 Inch FK Stainless PTFE lined Uniball bearings are utilized in place of the small factory ball joints and allow for increased travel without bind. These super stout Tundra upper control arms are designed for longevity in rugged offroad conditions while providing a more positive on road feel. The Fabtech upper control arms have been designed to work in conjunction with the Dirt Logic 2.5 Coilover shocks to provide additional front wheel travel. The rear suspension receives Dirt Logic 2.25 shocks for a balanced ride. All Dirt Logics are constructed with a stainless steel body and a NitroSteel piston rod for maximum corrosion resistance in the harshest conditions. These Dirt Logics have been extensively tested and tuned to provide a superior ride quality both on and offroad. Rear lift is accomplished using coil spring spacers that provide the additional ride height.
Additional information
| Weight | 125 lbs |
|---|---|
| Dimensions | 35.75 × 21.6 × 8.75 in |
| Brand | FABTECH |
| Manufacturer Part Number | K7091DL |
Vehicle Fitment
This part fits the vehicles listed below. Always confirm fitment for your exact vehicle before ordering.
This part is compatible with 11 vehicles.
| Year | Make | Model | Trim | Engine | Notes |
|---|---|---|---|---|---|
| Loading fitment... | |||||
Related products
-
Crown Automotive Coil Spring Isolator, Black, Rubber, Single – 52059912AC
Vehicle-Specific Part: Check Fitment $19.00 Add to cart Quick View -
Crown Automotive Body Mount Bushings, Black, Rubber – 52002723MK
Vehicle-Specific Part: Check Fitment $249.03 Add to cart Quick View -
Crown Automotive Tie Rod End, Greasable, With Offset, Steel – 52060052AF
Vehicle-Specific Part: Check Fitment $154.95 Add to cart Quick View -
Crown Automotive Stabilizer Bar Link Bushing, Black, Rubber – 4782681AB
Vehicle-Specific Part: Check Fitment $7.81 Add to cart Quick View