Description

Ignition Coil; Pro Power HVC; Single Tower; 45000 Volts; 0.04 Ohms Primary Resistance/86 Ohms Secondary Resistance/85:1 Turns Ratio/1mH Inductance/1.1Amp Peak Current/150uS Spark Duration; Red and Black

Attributes:

Recommended Use: Strip
Coil Style: 1 Tower
Internal Construction: Epoxy Filled
Maximum Voltage: 45000 Volt
Coil Wire Attachment Type: Male/ HEI
Color: Black/ Red
Primary Resistance: 0.04 Ohm
Secondary Resistance: 0.86 Kilo Ohm
Diameter (IN): Not Applicable
Height (IN): 5 Inch
Includes Mounting Bracket: Yes
Includes Coil Wire: No
Includes Ballast Resistor: No

Features & Benefits:

Designed For Racing Applications With An MSD 7 Series Ignition Control
Efficient E-Core Winding Design Produces More Voltage And Current
85:1 Turns Ratio And Lower Primary Resistance Produce High Voltage Output
Windings Are Encased In Red Epoxy And Secured With Extruded Brackets
Spark Plug Style Terminal And Threaded Brass Primary Studs
Supplied With Rubber Shock Mounts
Limited 1 Year Warranty

About Product:
Coils have always had to compromise voltage output against current output. More voltage increases the initial ionization of the spark plug gap, but lowers the amount of current, or heat, that follows across the plug gap. When a coil is designed to produce more current, the voltage output generally suffers which taxes the ease of ionizing the gap. The MSD HVC coils are designed to produce maximum voltage and energy! To accomplish this combination of high voltage and current MSD uses an E-core winding design. This is a very efficient design where less loss occurs during the transfer of electricity due to the closed core of the coil. Another benefit is that the coils run extremely cool, even at high racing RPM, thanks to the efficient design and huge laminations.