Act Clutch Set, Street, 8.4 Inch Clutch Diameter, 1 Inch X 14 Spline Input Shaft, Diaphragm, Steel Pressure Plate – BM2-HDMM
$510.64
Act Clutch Set, Street, 8.4 Inch Clutch Diameter – BM2-HDMM
Description
Clutch Set; Street; 8.4 Inch Clutch Diameter; 1 Inch x 14 Spline Input Shaft; Diaphragm; Steel Pressure Plate; Single Disc/ Organic Friction Material; Full Face Design; With Throwout Bearing
Attributes:
- Input Shaft Size: 1 Inch X 14 Spline
- Pressure Plate Design: Diaphragm
- Disc Diameter: 8.4 Inch
- Number Of Friction Discs: 1 Disc
- Flywheel Weight: No Flywheel
- Flywheel Tooth Count: No Flywheel
- Disc Friction Material: Organic
- Disc Friction Face Design: Full Face
- Disc Hub Design: Custom
- Pressure Plate Clamp Load: 9.6 Pound
- Pressure Plate Centrifugal Assist: No Centrifugal Assist
- Torque Holding Capacity: 270 Feet/Pound
- Pressure Plate Material: Steel
- Flywheel Material: No Flywheel
- Includes Throwout Bearing: Yes
- Includes Pilot Bearing: No
- Includes Alignment Tool: Yes
Features & Benefits:
- Center Hub Springs Help Lessen The Shock Of Engagement
- Premium Organic Friction Material For High Heat Tolerance, Quick Recovery, Good Friction And Long Life
- Strict SFI Certification Ensures Driver And Spectator Safety
- Steel Backed Linings For Higher Burst Strength
- Spring Center Construction Properly Dampens Torsional Vibrations For Quieter Operation
- Clamp Load Increase Of 20 To 50 Percent Over Stock With A Stock To Moderate Pedal Feel
- All ACT Pressure Plates Are Dynamically Computer Balanced For Smooth Operation At High RPM
- Limited 1 Year Warranty
About Product:
This ACT clutch kit includes a Heavy-Duty pressure plate, Modified Street disc, release bearing, pilot bearing and alignment tool. The Heavy-Duty pressure plate allows for a 20 to 50 Percent increase in clamp load over the stock unit. ACT’s Heavy-Duty pressure plate features precision CNC machined parts, drive straps and rivets to securely locate contact face to the cover for quiet, trouble-free operation. The Heavy-Duty pressure plate will have a stock to moderate pedal feel. ACT pressure plates feature creative diaphragm designs to increase clamp load, reduce deflection and maximize clutch life. All diaphragms endure an exclusive four-stage, heat-treating process for unparalleled performance. The Heavy-Duty pressure plate meets SFI Specification 1.1. ACT Modified Street discs feature premium organic materials that have increased friction and higher copper content for better heat transfer. These discs are modified with reduced marcel for faster shift action to complement ACT pressure plates. Modified Street discs are recommended for street or occasional race use. The kit is completed with a quality, stock replacement release bearing, pilot bearing and alignment tool.
Additional information
| Weight | 14.6 lbs |
|---|---|
| Dimensions | 14 × 14 × 5 in |
| Brand | ACT |
| Manufacturer Part Number | BM2-HDMM |
Vehicle Fitment
This part fits the vehicles listed below. Always confirm fitment for your exact vehicle before ordering.
This part is compatible with 11 vehicles.
| Year | Make | Model | Trim | Engine | Notes |
|---|---|---|---|---|---|
| Loading fitment... | |||||
Related products
-
Crown Automotive Differential Pinion Seal, Model 30 or Model 44 Front Axle, Rubber – 5066446AA
Vehicle-Specific Part: Check Fitment $13.30 Add to cart Quick View -
Crown Automotive Axle Shaft, Dana 44 Vari-Lok, 30 Spline, 5 Lug, Single – 5012872AA
Vehicle-Specific Part: Check Fitment $389.88 Add to cart Quick View -
Crown Automotive Differential Spider Gear, Dana 35, Non Limited Slip, 27 Spline – 4740670
Vehicle-Specific Part: Check Fitment $159.59 Add to cart Quick View -
Crown Automotive Axle Shaft Disconnect Actuator, For Use with Dana 30, With Vacuum Diaphragm/ Gasket/ Hardware – 4506116
Vehicle-Specific Part: Check Fitment $112.00 Add to cart Quick View