Ats Diesel Auto Trans Governor Solenoid, Upgrades OEM Governor Solenoid to GM Governor Pressure Solenoid Unit – 3031002188
$201.00
Ats Diesel Auto Trans Governor Solenoid – 3031002188
Description
Auto Trans Governor Solenoid; Upgrades OEM Governor Solenoid to GM Governor Pressure Solenoid Unit
Attributes:
- Transmission Model: 48RE
- Finish: Bare
- Material: Aluminum
Features & Benefits:
- Handles Higher Pressure
- Prevents Over Pressure Codes
- Connector Type: 4-Pin Rectangular Connector
- Bolt-In Installation
- Limited 5 Year Warranty Or 500,000 Mile Warranty
About Product:
ATS recommends that you replace the Transducer sending unit 1999.5 to 2007 303-002-2230 or 1996 to 1999.5 303-002-2188 at the same time that you’re upgrading the Governor pressure solenoid. The transducer is also known to fail, and it is housed in the same billet aluminum block that mounts the solenoid. The job of the transducer is to report the actual governor pressure and transmission fluid temperature back to the TCM. When this sensor starts to fail the inaccurate pressure reported back to the TCM can cause some very strange shifting concerns and can be very hard to diagnose. Replacing the transducer sensor is good insurance. The ATS upgraded governor pressure Billet Block/Solenoid//Transducer Sensor assembly is 100 Percent interchangeable with any stock or aftermarket Dodge, Chrysler or Jeep RE valve body. The assembly bolts in place of the original casting and is 100 Percent plug and play. We do recommend you install a new transmission filter at the same time you are upgrading the solenoid block assembly considering you will have the transmission pan removed to do the repair.
Additional information
| Weight | 3 lbs |
|---|---|
| Dimensions | 7 × 7 × 7 in |
| Brand | ATS DIESEL |
| Manufacturer Part Number | 3031002188 |
Vehicle Fitment
This part fits the vehicles listed below. Always confirm fitment for your exact vehicle before ordering.
This part is compatible with 473 vehicles.
| Year | Make | Model | Trim | Engine | Notes |
|---|---|---|---|---|---|
| Loading fitment... | |||||
Related products
-
Crown Automotive Differential Spider Gear, Dana 35, Non Limited Slip, 27 Spline – 4740670
Vehicle-Specific Part: Check Fitment $159.59 Add to cart Quick View -
Crown Automotive Clutch Pedal Adjustment Activation Switch, Plastic/Nylon, Black, Mounts on the Clutch Master Cylinder Rod – 56009047
Vehicle-Specific Part: Check Fitment $73.94 Add to cart Quick View -
Crown Automotive Axle Shaft, Dana 35, 30-1/4 Inch Length, Rubber/ Steel, Single, With Wheel Studs/ Bearing/ Seal/ Retainer – 5012820AA
Vehicle-Specific Part: Check Fitment $294.70 Add to cart Quick View -
Crown Automotive Transfer Case Chain – 4338935
Vehicle-Specific Part: Check Fitment $190.04 Add to cart Quick View