Act Clutch Set, Heavy Duty-Monoloc/ Race, 9.4 Inch Clutch Diameter, 1 Inch X 23 Spline Input Shaft, Diaphragm, Steel Pressure Plate – ME3-HDG6
$1,063.95
Act Clutch Set, Heavy Duty-Monoloc/ Race, 9.4 Inch Clutch Diameter – ME3-HDG6
Description
Clutch Set; Heavy Duty-Monoloc/ Race; 9.4 Inch Clutch Diameter; 1 Inch x 23 Spline Input Shaft; Diaphragm; Steel Pressure Plate; 650 Foot Pound Torque Capacity; Single Disc/ Ceramic Friction Material; 6 Paddle Design/ Sprung Hub; With Clutch Disc/ Pressure Plate/ Alignment Tool/ Release Bearing
Attributes:
- Input Shaft Size: 1 Inch X 23 Spline
- Pressure Plate Design: Heavy Duty
- Disc Diameter: 9.4 Inch
- Number Of Friction Discs: 1 Disc
- Flywheel Weight: No Flywheel
- Flywheel Tooth Count: No Flywheel
- Disc Friction Material: Ceramic
- Disc Friction Face Design: Single 6 Paddle
- Disc Hub Design: Sprung
- Torque Holding Capacity: 650 Feet/Pound
- Pressure Plate Material: Steel
- Flywheel Material: No Flywheel
- Includes Throwout Bearing: Yes
- Includes Pilot Bearing: No
- Includes Alignment Tool: Yes
Features & Benefits:
- Light To Moderate Pedal Effort, Aggressive Engagement, OE To Mild Gear Rattle, Confidence During Hard Shifts
- Moderate Friction Life, Extended By Exclusive Diaphragm Design, Dramatic Improvement In Release Mechanism Life
- Carefully Engineered, Precisely Assembled, Accurately Balanced, With Premium Organic Friction Materials For Heat Tolerance And Reduced Fade, Major Improvement In Release Mechanism
- Recommended For High Horsepower Street Or Race Use
- 100 Percent Clamp Load Tested And Dynamically Computer Balanced For Smooth High RPM Reliability
- Limited 1 Year Warranty
About Product:
Features ACT’s most popular Heavy Duty pressure plate. ACT Heavy Duty pressure plates use exclusive diaphragm design to increase clamp load, reduce deflection and maximize clutch life. All diaphragms endure a four-stage, heat-treating process for unparalleled performance. ACT pressure plates have precision cover stampings to provide rigidity and consistency. ACT’s 6-pad spring-centered race disc features a spring-center construction to properly damp torsional vibrations and resist failure under harsh conditions. ACT spring retainers utilize wraparound spring windows and thicker retainer stampings to provide spring support, reduce stress concentrations, and increase strength and reliability. With the 6-pad spring-centered race disc engagement is harsher, but shifting is faster. The 6-pad spring-centered disc is recommended for larger clutch sizes to absorb more heat. Monoloc is a one-piece, direct replacement or upgrade to the standard, two-piece wedge collar and wire ring featured in pull-type clutches. The spring tension of the segmented retaining ring is carefully calculated and tested for optimal performance. It provides uniform loading on the bearing and pressure plate to assure proper alignment, regardless of driver influence or vehicle modifications. Monoloc’s hardened Chrome-moly steel construction will provide years of service.
Additional information
| Weight | 21.2 lbs |
|---|---|
| Dimensions | 14 × 14 × 5 in |
| Brand | ACT |
| Manufacturer Part Number | ME3-HDG6 |
Vehicle Fitment
This part fits the vehicles listed below. Always confirm fitment for your exact vehicle before ordering.
This part is compatible with 7 vehicles.
| Year | Make | Model | Trim | Engine | Notes |
|---|---|---|---|---|---|
| Loading fitment... | |||||
Related products
-
Crown Automotive Shifter Boot, Black, Rubber – 52078970AC
Vehicle-Specific Part: Check Fitment $24.71 Add to cart Quick View -
Crown Automotive Differential Pinion Seal, Outer Pinion Seal, Metal/ Rubber – 5012813AA
Vehicle-Specific Part: Check Fitment $13.13 Add to cart Quick View -
Crown Automotive Axle Shaft, Dana 35, 31.74 Inch Length, Steel, Single, With Seal/ Bearing/ Retainers/ Wheel Studs – 5012821AA
Vehicle-Specific Part: Check Fitment $294.70 Add to cart Quick View -
Crown Automotive Differential Pinion Seal, Dana 35/ Dana 44 Axle – 68003265AA
Vehicle-Specific Part: Check Fitment $18.81 Add to cart Quick View