Exedy Clutch Set, Stage 2 Heavy Duty, 240 Millimeter Clutch Diameter, 25.2 Millimeter X 24 Spline Input Shaft, Diaphragm – 15951HD
$759.36
Exedy Clutch Set, Stage 2 Heavy Duty, 240 Millimeter Clutch Diameter – 15951HD
Description
Clutch Set; Stage 2 Heavy Duty; 240 Millimeter Clutch Diameter; 25.2 Millimeter x 24 Spline Input Shaft; Diaphragm; 3597 Pound Static Pressure; Iron Pressure Plate; Single Disc/ Cerametallic Friction Material; 6 Puck Design/ Sprung Hub; 13.3 Pound Steel Flywheel; Requires Clutch Flywheel Part Number EXEFF02 Depending On Application Only If Listed
Attributes:
- Input Shaft Size: 25.2 Millimeter X 24 Spline
- Pressure Plate Design: Heavy Duty
- Disc Diameter: 9.4 Inch
- Number Of Friction Discs: 1 Disc
- Flywheel Weight: No Flywheel
- Flywheel Tooth Count: No Flywheel
- Disc Friction Material: Cerametallic
- Disc Friction Face Design: 3 Puck
- Disc Hub Design: Sprung
- Pressure Plate Clamp Load: 3597 Pound
- Pressure Plate Centrifugal Assist: No Centrifugal Assist
- Torque Holding Capacity: 860 Feet/Pound
- Pressure Plate Material: Iron
- Flywheel Material: Chromoly Steel
Features & Benefits:
- Cerametallic Clutches Are Designed To Handle The Abuse Of High Power Modified Engines
- Cerametallic Friction Material Can Handle Much More Abuse Than Stock Type Disc Assemblies Without Slipping And Fading
- Discs Have Sprung Center Dampers To Reduce The Impact And Shock Loads Transmitted Through The Drivetrain
- Thick Discs Have Better Heat Capacity And Therefore Better Durability In Demanding Applications
- Remarkable Cushion Button Disc Combines Cerametallic Button Facing With Marcel Cushion Springs To Maintain Comfortable Driving While Supporting A Respectable Amount Of Power
- Smooth Engagement Is Ideal For The Street, And Thanks To Its Heavy Duty Sprung Hub Dampening Assembly, Can Handle The Power Of High Torque Motors
- Comfortable On The Street, But Power Holding Capability For The Track
- Clutch Covers Are Designed To Achieve A Clamping Load That Is Approximately 40 Percent Higher Than The Genuine Part Allowing A Higher Torque Transmitting Capacity
- Ductile Material Is Used For All Pressure Plates And, High Burst Strength Can Be Achieved In All Temperature Ranges
- Limited 1 Year Or 20,000 Mile Warranty
About Product:
Exedy cerametallic clutches are designed to handle the abuse of high powered modified engines. Our cerametallic friction material can handle much more slippage than stock type disc assemblies without slipping and fading. All cerametallic discs feature spring center dampers to reduce impact and shock loads. Normal thickness discs have greater heat capacity and therefore better durability in demanding applications such as all wheel drive.
Additional information
| Weight | 18.8 lbs |
|---|---|
| Dimensions | 13 × 12.25 × 3.5 in |
| Brand | EXEDY |
| Manufacturer Part Number | 15951HD |
Vehicle Fitment
This part fits the vehicles listed below. Always confirm fitment for your exact vehicle before ordering.
This part is compatible with 12 vehicles.
| Year | Make | Model | Trim | Engine | Notes |
|---|---|---|---|---|---|
| Loading fitment... | |||||
Related products
-
Crown Automotive Drive Shaft Boot, Single – 5083001AA
Vehicle-Specific Part: Check Fitment $16.14 Add to cart Quick View -
Crown Automotive Axle Shaft, Dana 35, 31.74 Inch Length, Steel, Single, With Seal/ Bearing/ Retainers/ Wheel Studs – 5012821AA
Vehicle-Specific Part: Check Fitment $294.70 Add to cart Quick View -
Crown Automotive Differential Carrier Bushing, Steel/Rubber, Black – 68091398AA
Vehicle-Specific Part: Check Fitment $15.21 Add to cart Quick View -
Crown Automotive Auto Trans Shifter Cable, AW4/ 30RH/ Automatic Transmission, 50-1/4 Inch Overall Length – 52078700
Vehicle-Specific Part: Check Fitment $24.71 Add to cart Quick View