Fabtech Lift Kit Suspension, 3 Inch Front Lift, 3 Inch Rear Lift, With Front and Rear Dirt Logic 2.5 Coil Over Shock Absorbers IN Kit – K2378DL
$5,476.04
Fabtech Lift Kit Suspension, 3 Inch Front Lift, 3 Inch Rear Lift – K2378DL
Description
Lift Kit Suspension; 3 Inch Front Lift; 3 Inch Rear Lift; With Front And Rear Dirt Logic 2.5 Coil Over Shock Absorbers In Kit; Black Components; With Control Arms/ Reservoir Brackets/ Installation Hardware
Attributes:
- Front Lift Amount (IN): 3 Inch
- Rear Lift Amount (IN): 3 Inch
- Maximum Tire Size: 35 x 12.50
- Front Lift Type: Coil Spring
- Rear Lift Type: Coil Spring
- Shock Type: Hydraulic/ Nitrogen Gas Charged
- Wheel Backspacing (IN): 4.50
- Minimum Wheel Diameter: 17
- Wheel Offset (MM): -12.7
- Shocks: With Shocks In Kit
- Color: Black Components/ Black Shock Absorbers
Features & Benefits:
- 17-4 Stainless Steel Heat Treated Uniball Pin Fits Into Factory Ball Joint Taper Without Modification To The Spindle
- Chromoly Tubing Reduces Flex Found In Stock Arms For More Positive Road Feel
- Arms Eliminate The Upper Ball Joint With Super Strong 1 Inch ID Stainless American Uniball
- Adjustable Lower Rear Link Arms For Increased Strength And Articulation
- Front And Rear Dirt Logic 2.5 Coilover Shocks
- Great System For The Daily Driver That Requires Increased Offroad Performance
- Limited Lifetime Warranty
About Product:
Fabtech’s high quality Uniball UCA lift kit for the Bronco offers increased front suspension travel for enhanced offroad capabilities with clearance to run 35 Inch tall tires. The stance of the vehicle with this kit will become more level front to rear for an aggressive look. The factory Bronco upper control arms are replaced with Fabtech’s Uniball Upper Control Arms that provide additional wheel travel with an extra degree of caster compared to stock arms. The increased caster helps to balance steering effort with oversized tires. The Fabtech upper control arms are constructed of the finest material with 0.120 Inch wall 1-1/4 Inch Outer Diameter 4130 Chromoly steel tubing. High quality 1 Inch FK Stainless PTFE lined Uniball bearings are utilized in place of the small factory ball joints and allow for increased travel without bind. These super stout Bronco upper control arms are designed for longevity in rugged offroad conditions while providing a more positive on road feel. The Fabtech upper control arms have been designed to work in conjunction with the Dirt Logic 2.5 Coilover shocks to provide additional front wheel travel. The rear suspension receives Adjustable Lower Link Arms with Fabtech’s lifetime 5 Ton joints ®. The lower links are 0.313 thick wall tubing that are guaranteed never to bend. Dirt Logic 2.5 Coilovers are utilized for a balanced ride front to rear. This system is perfect for those that want increased suspension performance with a low lift height. A great choice for daily drivers that want a clean look with the ability to hit the trails on weekends.
Additional information
| Weight | 168 lbs |
|---|---|
| Dimensions | 36.1 × 15.5 × 8.75 in |
| Brand | FABTECH |
| Manufacturer Part Number | K2378DL |
Vehicle Fitment
This part fits the vehicles listed below. Always confirm fitment for your exact vehicle before ordering.
This part is compatible with 34 vehicles.
| Year | Make | Model | Trim | Engine | Notes |
|---|---|---|---|---|---|
| Loading fitment... | |||||
Related products
-
Crown Automotive Stabilizer Bar Link Bushing, Black, Rubber – 4782681AB
Vehicle-Specific Part: Check Fitment $7.81 Add to cart Quick View -
Crown Automotive Rack and Pinion Mount Bushing, Steel/ Rubber, Black, Single – 52038783AC
Vehicle-Specific Part: Check Fitment $12.44 Add to cart Quick View -
Crown Automotive Body Mount Bushings, Black, Rubber – 52002008
Vehicle-Specific Part: Check Fitment $8.53 Add to cart Quick View -
Crown Automotive Bump Stop, Polyurethane, Single – 52040426
Vehicle-Specific Part: Check Fitment $18.63 Add to cart Quick View