Fabtech Lift Kit Suspension, 3 Inch Front Lift, 3 Inch Rear Lift, With Rear Performance Shock Absorbers – K1062
$1,227.84
Fabtech Lift Kit Suspension, 3 Inch Front Lift, 3 Inch Rear Lift – K1062
Description
Lift Kit Suspension; 3 Inch Front Lift; 3 Inch Rear Lift; With Rear Performance Shock Absorbers; Black Components/ White Shock Absorbers; With Uniball Front Upper Control Arms/ Stainless PTFE Uniballs/ Differential Drop Bracket/ Skid Plate/ Rear Lift Block/ U-Bolts/ Front Coilover Spacers
Attributes:
- Front Lift Amount (IN): 3 Inch
- Rear Lift Amount (IN): 3 Inch
- Front Lift Type: Strut Assembly Spacer
- Rear Lift Type: Leaf Spring Block
- Maximum Tire Size: 30 x 11.50
- Shock Type: Hydraulic
- Wheel Backspacing (IN): 4.5
- Minimum Wheel Diameter: 17
- Wheel Offset (MM): 0
- Shocks: With Shocks In Kit
- Color: Black Components/ White Shock Absorbers
Features & Benefits:
- Increased Ground Clearance
- Top Quality Uniball Upper Control Arms For Aggressive Offroad Use
- 1 Inch ID FK Uniballs With PTFE For Ultimate Strength
- Increased Fender Clearance Compared To A Leveling Kit For 33 Inch Tall Tires
- Suspension Can Be Restored To Stock
- Limited Lifetime Warranty
About Product:
This system offers a mild lift height with easy installation for clearance of 33 Inch tall tires on GM C/K1500s. Lift is accomplished by utilizing the factory front Coilover shocks with steel spacer system that helps retain the stock ride of the front suspension. The stock upper control arms are replaced with high quality tubular Uniball arms that allow unrestricted movement throughout the travel range. The arms are constructed of top quality material including 0.120 Inch wall 4130 Chromoly tubing with a 1.50 Inch Outer Diameter and 1 Inch FK Stainless PTFE Uniballs. These arms are the best on the market for aggressive offroad driving in harsh conditions. The front differential is relocated to keep CV angles proper with the new lift height while a 1/4 Inch thick steel skid plate provides protection against offroad obstacles. Rear lift is accomplished with 1-1/2 Inch rear lift block and u-bolts to help level the stance of the vehicles. Performance rear shock absorbers replace the stock units for increased damping.
Additional information
| Weight | 74.6 lbs |
|---|---|
| Dimensions | 22.53 × 15.59 × 12 in |
| Brand | FABTECH |
| Manufacturer Part Number | K1062 |
Vehicle Fitment
This part fits the vehicles listed below. Always confirm fitment for your exact vehicle before ordering.
This part is compatible with 1,090 vehicles.
| Year | Make | Model | Trim | Engine | Notes |
|---|---|---|---|---|---|
| Loading fitment... | |||||
Related products
-
Billet Spec Steering Wheel Cover, 14 Inch, Half Wrap Ring, Red Leather Wrapped – 29005
Not sure it fits? Ask us $86.30 Add to cart Quick View -
Crown Automotive Stabilizer Bar Link Bushing, Black, Rubber – 4782683AB
Vehicle-Specific Part: Check Fitment $8.35 Add to cart Quick View -
Crown Automotive Stabilizer Bar Link Bushing, Black, Rubber – 4782681AB
Vehicle-Specific Part: Check Fitment $7.81 Add to cart Quick View -
Crown Automotive Tie Rod Adjusting Sleeve, Metal, Black, 36-1/2 Inch Length, With Hardware – 52000596
Vehicle-Specific Part: Check Fitment $54.93 Add to cart Quick View