Fabtech Lift Kit Suspension, 3 Inch Front Lift, 3 Inch Rear Lift, Without Shock Absorbers IN Kit – Shock Change Not Necessary – K4192
$1,000.64
Fabtech Lift Kit Suspension, 3 Inch Front Lift, 3 Inch Rear Lift – K4192
Description
Lift Kit Suspension; 3 Inch Front Lift; 3 Inch Rear Lift; Without Shock Absorbers In Kit – Shock Change Not Necessary; Black Components; With Front And Rear Coil Springs/ Shock Absorber Brackets/ Stabilizer Bar Links/ Bump Stop Spacers/ Installation Hardware
Attributes:
- Front Lift Amount (IN): 3 Inch
- Rear Lift Amount (IN): 3 Inch
- Maximum Tire Size: 37 x 12.50
- Front Lift Type: Coil Spring
- Rear Lift Type: Coil Spring
- Shock Type: Without Shocks
- Wheel Backspacing (IN): 4.50
- Minimum Wheel Diameter: 17
- Wheel Offset (MM): 0
- Shocks: Without Shock Absorbers In Kit – Shock Change Not Necessary
- Color: Black Components/ Black Shock Absorbers
Features & Benefits:
- Features Front Coil Springs That Are A Dual Rate Design Allowing Extended Suspension Travel For Offroad Use While Providing A Smooth Highway Ride
- First Stage Of The Spring Provides A Soft Ride With The Ability To Extend For Additional Travel
- Second Stage Is Designed To Handle The Payload Of The Vehicle And Address Large Impact Absorption At Higher Speeds
- By Extending The Length Of The Links, It Prevents The Sway Bar From Going Over Center And Creating Bind At Full Extension Travel
- Gladiator Lift Kit Is An Excellent Choice For The Jeep Enthusiast That Wants To Run Larger Tires With Enhanced Offroad Capability And A Good Highway Ride
- Limited Lifetime Warranty
About Product:
This Sport lift kit is Fabtech’s most popular Jeep system providing increased ride height and suspension performance at a great price. Installation is easy and can be installed in a couple hours. The rear of the vehicle receives coil spring spacers retaining the factory ride and load carrying capacity. The spacer height is 1-3/4 Inch to help level the stance of the vehicle. Four bump stops extensions utilize the factory bump stops for compliant cushioning at full compression. The extensions retain the stock down travel to eliminate over cycling of the suspension and driveline. The extended length front and rear sway bar links with urethane bushings reposition the bars to work within the factory operating planes. By extending the length of the links, it prevents the sway bar from going over center and creating bind at full extension travel. The factory shocks are retained with steel extension brackets keeping the shocks in the proper travel range with the new ride height.
Additional information
| Weight | 98.1 lbs |
|---|---|
| Dimensions | 27.5 × 14.06 × 13.58 in |
| Brand | FABTECH |
| Manufacturer Part Number | K4192 |
Vehicle Fitment
This part fits the vehicles listed below. Always confirm fitment for your exact vehicle before ordering.
This part is compatible with 8 vehicles.
| Year | Make | Model | Trim | Engine | Notes |
|---|---|---|---|---|---|
| Loading fitment... | |||||
Related products
-
Crown Automotive Steering Stabilizer, OEM Replacement, Single, Without Mounting Brackets/ Without Hardware, Mounts to OE Locations – 52060058AE
Vehicle-Specific Part: Check Fitment $82.30 Add to cart Quick View -
Crown Automotive Bump Stop, Polyurethane, Single – 52040426
Vehicle-Specific Part: Check Fitment $18.63 Add to cart Quick View -
Crown Automotive Stabilizer Bar Mount Bushing – 5039149AB
Vehicle-Specific Part: Check Fitment $7.40 Add to cart Quick View -
Crown Automotive Stabilizer Bar Link Bushing, Black, Rubber – 4782681AB
Vehicle-Specific Part: Check Fitment $7.81 Add to cart Quick View