Fabtech Lift Kit Suspension, 4 Inch Front Lift, 4 Inch Rear Lift, Without Shock Absorbers IN Kit – Shock Change Not Necessary – K2384
$1,297.91
Fabtech Lift Kit Suspension, 4 Inch Front Lift, 4 Inch Rear Lift – K2384
Description
Lift Kit Suspension; 4 Inch Front Lift; 4 Inch Rear Lift; Without Shock Absorbers In Kit – Shock Change Not Necessary; Black Components; With Front Upper Ball Joint Control Arms/ Front And Rear Strut Assembly Spacers/ Rear Track Bar Bracket/ Installation Hardware
Attributes:
- Front Lift Amount (IN): 4 Inch
- Rear Lift Amount (IN): 4 Inch
- Front Lift Type: Spacers
- Rear Lift Type: Strut Assembly Spacer
- Maximum Tire Size: 35 x 12.50
- Shock Type: Without Shocks
- Wheel Backspacing (IN): 4.50
- Minimum Wheel Diameter: 17
- Wheel Offset (MM): -12.7
- Shocks: Without Shocks In Kit – Shock Change Not Necessary
- Color: Black Components/ Black Shock Absorbers
Features & Benefits:
- Chromoly Tubing Reduces Flex Found In Stock Arms For More Positive Road Feel
- 17-4 Stainless Steel Heat Treated Uniball Pin Fits Into Factory Ball Joint Taper Without Modification To The Spindle
- Arms Eliminate The Upper Ball Joint With Super Strong 1 Inch ID Stainless American Uniball
- Retains Stock Coilover Shocks For A Factory Ride
- Heavy-Duty Track Bar Bracket Re-Centers Axle Under The Vehicle For Proper Tracking
- Great System For The Daily Driver That Requires Increased Offroad Performance
- Limited Lifetime Warranty
About Product:
Fabtech’s High quality 4 Inch Bronco lift kit offers increased height to run 35 Inch tall tires with additional front suspension strength. This kit helps level the vehicle stance front to rear for a more aggressive appearance. The factory Bronco upper control arms are replaced with Fabtech’s Uniball Upper Control Arms that provide additional wheel travel with an extra degree of caster compared to stock arms. The increased caster helps to balance steering effort with oversized tires. The Fabtech upper control arms are constructed of the finest material with 0.120 Inch wall 1-1/4 Inch Outer Diameter 4130 Chromoly steel tubing. High quality 1 Inch FK Stainless PTFE lined Uniball bearings are utilized in place of the small factory ball joints and allow for increased travel without binding. These super stout Bronco upper control arms are designed for longevity in rugged offroad conditions while providing a more positive on road feel. The factory front and rear Coilover shocks are retained and receive spacers that provide height while maintaining the comfortable stock highway ride quality. With the increased ride height, the rear axle becomes offset to the vehicle. Fabtech addresses this with a heavy-duty track bar relocation bracket that re-centers the axle under the vehicle. This provides proper tracking of the axle to the vehicle as Ford intended it. This Bronco lift kit is an affordable suspension upgrade for enthusiasts that desire to run 35 Inch tall tires with Fabtech quality and strength.
Additional information
| Weight | 38.8 lbs |
|---|---|
| Dimensions | 23.3 × 15.5 × 7 in |
| Brand | FABTECH |
| Manufacturer Part Number | K2384 |
Vehicle Fitment
This part fits the vehicles listed below. Always confirm fitment for your exact vehicle before ordering.
This part is compatible with 64 vehicles.
| Year | Make | Model | Trim | Engine | Notes |
|---|---|---|---|---|---|
| Loading fitment... | |||||
Related products
-
Crown Automotive Steering Gear Box, Power Steering, Gray, Steel/ Rubber, With 4-BOLT Mounting – 52002085R
Not sure it fits? Ask us $684.85 Add to cart Quick View -
Crown Automotive Tie Rod Adjusting Sleeve, Metal, Black, 36-1/2 Inch Length, With Hardware – 52000596
Vehicle-Specific Part: Check Fitment $54.93 Add to cart Quick View -
Crown Automotive Stabilizer Bar Link Bushing, Black, Rubber – 4782681AB
Vehicle-Specific Part: Check Fitment $7.81 Add to cart Quick View -
Crown Automotive Stabilizer Bar Link Bushing, Black, Rubber – 4782683AB
Vehicle-Specific Part: Check Fitment $8.35 Add to cart Quick View