Fabtech Lift Kit Suspension, 6 Inch Front Lift, 3 Inch Rear Lift, With Rear Performance Shock Absorbers – K2371
$2,833.20
Fabtech Lift Kit Suspension, 6 Inch Front Lift, 3 Inch Rear Lift – K2371
Description
Lift Kit Suspension; 6 Inch Front Lift; 3 Inch Rear Lift; With Rear Performance Shock Absorbers; Black Components/ White Shock Absorbers; With Front And Rear Crossmembers/ Front Bump Stops/ Steering Knuckles/ Tie Rods/ Coil Over Spacers/ Skid Plate/ Stabilizer Bar Mounts/ Rear Lift Blocks And U Bolts/ Installation Hardware
Attributes:
- Front Lift Amount (IN): 6 Inch
- Rear Lift Amount (IN): 3 Inch
- Front Lift Type: Coil Over Spacer
- Rear Lift Type: Blocks And U-Bolts
- Maximum Tire Size: 37 x 12.50
- Shock Type: Hydraulic
- Wheel Backspacing (IN): 5.00
- Minimum Wheel Diameter: 20
- Wheel Offset (MM): 0
- Shocks: With Shocks In Kit
- Color: Black Components/ White Shock Absorbers
Features & Benefits:
- 1/4 Inch Thick Steel Lower Control Arm Crossmembers Are Arched For Maximum Ground Clearance
- Welded Box Design Of These Crossmembers Provides Additional Strength To The Front Suspension
- Fabtech’s Extended Length Ductile Iron Steering Knuckles Provide Zero Bump Steer Throughout The Suspension Travel
- Provides An Enhanced Driver Experience Compared To Stock And Near Stock Track Width Keeps The Tires Under The Fenders For A Clean Appearance
- Oversized Tie Rods Are Provided To Replace The Stock Units That Are Designed To Handle Oversized Tires
- Constructed Of A Stainless Steel Body With A NitroSteel ® Piston Rod For Maximum Corrosion Resistance And Durability
- Superior Ride Quality Both On And Offroad With Excellent Damping For Offroad Use
- Heavy-Duty Front Differential Skid Plate Is Constructed Of 1/4 Inch Thick Steel To Protect The Diff From Offroad Obstacles
- Stainless Steel Body With NitroSteel ® Piston Rod Provides Maximum Corrosion Resistance And Durability
- Limited Lifetime Warranty
About Product:
Fabtech’s world-renowned IFS suspension design for the Ford F150 provides excellent drivability both on and offroad. There is zero bump steer throughout the suspension cycle that helps reduce driver fatigue while improving the overall drivability of the vehicle. The near-stock track width keeps the tires under the fenders for a clean appearance. Fabtech’s proprietary steering knuckle geometry provides an excellent lock to lock turning radius to maneuver in tight spots. Heavy-Duty 1/4 Inch thick steel crossmembers feature eccentric style alignment cams for easy adjustment. Triple front diff mounts reposition the differential for vibration-free operation at high speed. The factory coilover shocks are relocated from the bottom to allow for full steering while achieving 6 Inch of lift. At the rear of the vehicle, the factory 2 Inch block is replaced with a 5 Inch Block and u-bolt system. Fabtech has addressed all aspects of the suspension for proper wheel travel and lock to lock steering without over cycling.
Additional information
| Weight | 263.2 lbs |
|---|---|
| Dimensions | 45.5 × 14.5 × 13 in |
| Brand | FABTECH |
| Manufacturer Part Number | K2371 |
Vehicle Fitment
This part fits the vehicles listed below. Always confirm fitment for your exact vehicle before ordering.
This part is compatible with 38 vehicles.
| Year | Make | Model | Trim | Engine | Notes |
|---|---|---|---|---|---|
| Loading fitment... | |||||
Related products
-
Crown Automotive Leaf Spring, No Lift, 4 Leaf Heavy Duty, Single – 52000707
Vehicle-Specific Part: Check Fitment $183.50 Add to cart Quick View -
Crown Automotive Stabilizer Bar Mount Bushing – 5039149AB
Vehicle-Specific Part: Check Fitment $7.40 Add to cart Quick View -
Crown Automotive Steering Gear Box, Power Steering, Gray, Steel/ Rubber, With 4-BOLT Mounting – 52002085R
Not sure it fits? Ask us $684.85 Add to cart Quick View -
Crown Automotive Wheel Bearing Hub Assembly Bolt – 34201535
Vehicle-Specific Part: Check Fitment $7.35 Add to cart Quick View