Fabtech Lift Kit Suspension, Performance Series, 3-1/2 Inch Front Lift, 1-1/2 Inch Rear Lift – K2323
$1,194.43
Fabtech Lift Kit Suspension, Performance Series, 3-1/2 Inch Front Lift – K2323
Description
Lift Kit Suspension; Performance Series; 3-1/2 Inch Front Lift; 1-1/2 Inch Rear Lift; With Rear Performance Shock Absorbers In Kit – Front Shock Change Not Necessary; Black Components/ White Shock Absorbers; With Front Upper Ball Joint Control Arms/ Front Strut Assembly Spacers/ Rear Lift Blocks And U Bolts/ Offset Intrusion Beam Kit/ Installation Hardware
Attributes:
- Front Lift Amount (IN): 3-1/2 Inch
- Rear Lift Amount (IN): 1-1/2 Inch
- Front Lift Type: Strut Assembly Spacer
- Rear Lift Type: Blocks And U-Bolts
- Maximum Tire Size: 33 x 12.50
- Shock Type: Hydraulic
- Wheel Backspacing (IN): 5.00
- Minimum Wheel Diameter: 18
- Wheel Offset (MM): 0
- Shocks: With Rear Performance Shock Absorbers In Kit – Front Shock Change Not Necessary
- Color: Black Components/ White Shock Absorbers
Features & Benefits:
- Value Priced System With Fabtech Quality
- Increased Ground Clearance For Offroad
- Tubular UCA Design With Urethane Bushings For Quiet Ride
- Extended Range Upper Ball Joints Allow For Increased Travel
- Offset Intrusion Beams For Full Steer Tire Clearance
- Easy Bolt-On Installation
- Limited Lifetime Warranty
About Product:
This quality 2019 Ford Ranger Upper Control Arm system is perfect for owners looking to increase ride height to run slightly larger tires than factory. The system will provide additional wheel travel with no suspension bind at full droop. Lift is accomplished with steel spacers that utilize the factory Coilover shocks for a stock like ride. Fabtech’s Upper Control Arms address the geometry of the front suspension with the new ride height for proper align ability. Heavy-Duty ball joints allow for extended suspension travel to eliminate binding. The system has been designed for proper CV axle angle and plunge thus eliminating the need to reposition the front differential. Included in this system is Fabtech’s Offset Intrusion Beam Kit that allows use of 33 Inch tires. The factory Intrusion Beams are located in the front fenderwells, forward and back of the tire. They limit the size of the tire you can install while being an integral part of the front collision safety impact feature of the vehicle. Rather than modifying or removing the Beams for tire clearance, Fabtech provides replacement Offset Intrusion Beams. They are constructed of 1/4 Inch thick steel and are a welded box design for maximum strength. They allow full steer with 33/1250R tires with a 5 Inch back space wheel.
Additional information
| Weight | 75 lbs |
|---|---|
| Dimensions | 24 × 15.5 × 6 in |
| Brand | FABTECH |
| Manufacturer Part Number | K2323 |
Vehicle Fitment
This part fits the vehicles listed below. Always confirm fitment for your exact vehicle before ordering.
This part is compatible with 15 vehicles.
| Year | Make | Model | Trim | Engine |
|---|---|---|---|---|
| Loading fitment... | ||||
Related products
-
Crown Automotive Tie Rod Adjusting Sleeve, Metal, Black, 36-1/2 Inch Length, With Hardware – 52000596
Vehicle-Specific Part: Check Fitment $54.93 Add to cart Quick View -
Crown Automotive Stabilizer Bar Link Bushing, Black, Rubber – 4782683AB
Vehicle-Specific Part: Check Fitment $8.35 Add to cart Quick View -
Crown Automotive Stabilizer Bar Mount Bushing, OE Replacment, 1.04 Inch, Black, Rubber – 52003232
Vehicle-Specific Part: Check Fitment $5.16 Add to cart Quick View -
Crown Automotive Steering Gear Box, Power Steering – 52038002
Vehicle-Specific Part: Check Fitment $782.05 Add to cart Quick View