Jks Mfg. Track Bar Bracket, Use with 3 Inch to 6 Inch Lift – JKSOGS160
$96.66
Jks Mfg. Track Bar Bracket, Use with 3 Inch to 6 Inch Lift – JKSOGS160
Description
Track Bar Bracket; Use with 3 Inch To 6 Inch Lift
Attributes:
- Lift/Drop: 3 Inch To 6 Inch
- Estimated Install Time (Hours): 0.5
Features & Benefits:
- Heavy-Duty Reinforcement Bracket Attaches Directly To Factory Track Bar Mount On Axle Housing
- Angled Design Corrects Rear Track Bar Geometry On Lifted Vehicles That Have Rotated Axle Housing Or CV Type Driveshaft
- Relocated Mounting Point Tilts Forward To Eliminate Binding And Premature Bushing Wear
- Premium Steel Construction Is Laser Cut, Formed And Folded For Maximum Strength
- Economical Bolt-On Solution Minimizes Risk Of Track Bar Failure On The Trail
- Limited Lifetime Warranty
About Product:
Track Bar Relocation Brackets from JKS Manufacturing permanently correct geometry of the rear track bar following the installation of a CV type driveshaft. The bolt-on bracket realigns the mounting point on the axle with the track bar and eliminates the binding problem caused by the rotated axle housing. As a result, the track bar and its bushings are returned to a neutral position and unwanted stresses are relieved from the mounting points. Our Relocation Brackets also raise the mounting point on the axle to reduce track bar operating angles and minimize side-to-side axle movement. This improves vehicle stability on lifted vehicles at higher speeds and helps keep the axle centered beneath the chassis at all times. A heavy, steel crush-proof sleeve fits inside the factory bracket to ensure maximum torque can be applied to the mounting hardware without risk of loosening or distortion over time.
Additional information
| Weight | 6.5 lbs |
|---|---|
| Dimensions | 14 × 8 × 6 in |
| Brand | JKS MFG. |
| Manufacturer Part Number | JKSOGS160 |
Vehicle Fitment
This part fits the vehicles listed below. Always confirm fitment for your exact vehicle before ordering.
This part is compatible with 45 vehicles.
| Year | Make | Model | Trim | Engine |
|---|---|---|---|---|
| Loading fitment... | ||||
Related products
-
Crown Automotive Tie Rod End, Greasable, With Offset, Steel – 52060052AF
Vehicle-Specific Part: Check Fitment $154.95 Add to cart Quick View -
Crown Automotive Pitman Arm – 52005285
Vehicle-Specific Part: Check Fitment $57.31 Add to cart Quick View -
Crown Automotive Steering Gear Box, Power Steering, Gray, Steel/ Rubber, With 4-BOLT Mounting – 52002085R
Not sure it fits? Ask us $684.85 Add to cart Quick View -
Crown Automotive Steering Stabilizer, OEM Replacement, Single, Without Mounting Brackets/ Without Hardware, Mounts to OE Locations – 52060058AE
Vehicle-Specific Part: Check Fitment $82.30 Add to cart Quick View