ReadyLIFT Lift Kit Suspension, 7 Inch Front Lift, 7 Inch Rear Lift – 44-34720
$2,529.95
ReadyLIFT Lift Kit Suspension, 7 Inch Front Lift, 7 Inch Rear Lift – 44-34720
Description
Lift Kit Suspension; 7 Inch Front Lift; 7 Inch Rear Lift; With Rear Falcon Shock Absorbers In Kit – Front Shock Change Not Necessary; Black Components; With Front Strut Assembly Extensions/ Tubular Front Upper Control Arms/ Rear Lift Blocks and U Bolts/ Front And Rear Crossmembers/ Differential Drop Kit/ Skid Plate/ Steering Knuckles/ Installation Hardware
Attributes:
- Front Lift Amount (IN): 7 Inch
- Rear Lift Amount (IN): 7 Inch
- Front Lift Type: Strut Assembly
- Rear Lift Type: Blocks And U-Bolts
- Maximum Tire Size: 35 x 12.50
- Shock Type: Monotube
- Wheel Backspacing (IN): 4.5
- Wheel Offset (MM): -12
- Shocks: With Shocks In Kit
- Color: Gray
Features & Benefits:
- Skid Plate Are Constructed Of Thick 3/16 Inch Plate Steel
- Allows For Up To A 35 Inch Tall Off Road Tire
- Requires At Least A 9 Inch Wide Wheel With -12 Offset
- Retains Factory Turning Radius, Ride And Handling
- Works With Front-Only MagneRide
- Comes With Premium Bilstein Shocks
- Limited 5 Year Or 60,000 Mile Warranty
About Product:
ReadyLIFT ® is excited to now offer a brand new 7 Inch big lift kit for 2014 to 2018 Chevy Silverado and GMC Sierra 1500 trucks. This new lift system will work with trucks equipped with or without MagneRide. The new 7 Inch lift kit is designed for use on 2014-UP GM 1500 trucks equipped with the factory Stamped Steel front suspension and comes with new tubular upper control arms. Some of the great features our new 7 Inch lift kit comes with retaining the factory turning radius while minimizing track width increase to less than 0.5 Inch per side. This kit will allow for up to a 35 Inch tall tire on a 9 Inch wide wheel with -12 offset. Our new “clam-shell” style lower strut extension retains use of the factory struts (both standard and MagneRide) and does not require strut rotation. These new clam-shell brackets utilizes our TCT lower bushings to provide a precise pivot point that maintains the factory ride. The addition of our proprietary new tubular upper control arms with TCT pivot bushings. Ensures prolonged upper control arm strength which is far superior to the OE stamped steel control arms. Boxed steel front/rear cross members and full width front skid plate are constructed of thick 3/16 Inch plate steel while also allowing for use of the OE front plastic gravel guard to protect the engine bay and retain the proper air flow as intended by the GM designers. New 1/4 Inch boxed plate steel differential drop brackets feature a double gusset and boxed center rib to take the abuse of front differential torsional twisting. Rear lift is achieved with fabricated 3/16 Inch thick plate steel rear lift blocks that comes with built-in bump stop landings and an offset pin design to properly center the axle and specific angles to the blocks to retain the proper pinion angle. This new lift system comes with premium extended length Bilstein rear shocks.
Additional information
| Weight | 330 lbs |
|---|---|
| Dimensions | 48 × 25 × 13 in |
| Brand | READYLIFT |
| Manufacturer Part Number | 44-34720 |
Related products
-
Crown Automotive Tie Rod End, Greasable, With Offset, Steel – 52060052AF
Vehicle-Specific Part: Check Fitment $154.95 Add to cart Quick View -
Crown Automotive Leaf Spring, No Lift, 4 Leaves, Single Spring – 4636975
Vehicle-Specific Part: Check Fitment $151.16 Add to cart Quick View -
Crown Automotive Steering Shaft, Lower – 52078705
Vehicle-Specific Part: Check Fitment $285.19 Add to cart Quick View -
Crown Automotive Body Mount Bushings, Black, Rubber – 52002723MK
Vehicle-Specific Part: Check Fitment $249.03 Add to cart Quick View