Rubicon Exp Shock Absorber, Nitrogen Gas Charged Mono Tube, Rubicon Express Advantage Lifetime Warranty, Non Adjustable, With Boots, Single – RXJ714
$159.66
Rubicon Exp Shock Absorber, Nitrogen Gas Charged Mono Tube – RXJ714
Description
Shock Absorber; Nitrogen Gas Charged Mono Tube; Rubicon Express Advantage Lifetime Warranty; Non Adjustable; With Boots; Single
Attributes:
- Type: Nitrogen Gas Charged
- With Coil Spring: No
- Internal Design: Monotube
- Adjustable Valving: No
- Extended Length (IN): 25 Inch
- Compressed Length (IN): 15.3 Inch
- Upper Mounting Style: Eyelet
- Lower Mounting Style: Cross Pin
- Body Color: Silver
- Quantity: Single
- Universality: Vehicle Specific
- Rod Diameter (IN): 1/2 Inch
- Valving Type: Application Specific Valving
- Rod Material: Steel
- With Reservoir: No
- Includes Dust Shield: No
- Includes Hardware: No
- Includes Boot: Yes
- Estimated Install Time (Hours): 0.5
Features & Benefits:
- Specifically Calibrated And Tested For Each Vehicle
- Mono-Tube Design Provides Excellent Heat Dissipation Resulting In Dependable Performance Under All Conditions
- Large 46 Millimeter Sintered Metal Velocity-Sensitive Piston For More Consistent Performance. Nitro Steel Piston Rods, Won’t Chip Or Peel Like Chrome Rods
- Viton Seal And Low Friction Piston Rod Bearing For Long Life. Available With Remote Reservoir
- Fully Serviceable, Tunable. Polyurethane Bushings Are More Responsive
- Durable Powder Coated Finish Resists Scratches
- Robotic Welds For Greater Consistency
- Limited Lifetime Warranty
About Product:
The basic purpose of a shock is to work with the spring when the vehicle’s suspension is under compression to resist the compressive force of a bump, and then to work against the spring during rebound to prevent the spring from delivering its compressed potential energy to the wheel and causing the vehicle to bounce. With the correct spring rates and compression valving, the vehicle will absorb the bump with a minimum of deflection to the chassis. Then with the correct rebound valving, the suspension will return to ride height with a minimum excursion beyond ride height. Assuming correct spring rates, too much compression valving will create a harsh ride and too little will result in abused bumpstops. Too much rebound valving will cause the suspension to react too slowly and not return to ride height in time for the next bump, too little and the vehicle will bounce. When you add the variables of speed, varying size of bumps (amplitude), distance between the bumps (frequency), and a myriad of chassis tuning objectives and hurdles, shock tuning becomes the most difficult and single most important component of suspension tuning. Changes in vehicle weight (people, baggage, fuel) varying on-road and off-road terrain (smooth highway, twisty mountain roads, bad pavement, fire roads, washboard, etc.) make tuning a shock and spring package very difficult.
Additional information
| Weight | 6 lbs |
|---|---|
| Dimensions | 36 × 4 × 4 in |
| Brand | RUBICON EXP |
| Manufacturer Part Number | RXJ714 |
Vehicle Fitment
This part fits the vehicles listed below. Always confirm fitment for your exact vehicle before ordering.
This part is compatible with 86 vehicles.
| Year | Make | Model | Trim | Engine | Notes |
|---|---|---|---|---|---|
| Loading fitment... | |||||
Related products
-
Crown Automotive Wheel Bearing Hub Assembly Bolt – 34201535
Vehicle-Specific Part: Check Fitment $7.35 Add to cart Quick View -
Crown Automotive Steering Stabilizer, OEM Replacement, Single, Without Mounting Brackets/ Without Hardware, Mounts to OE Locations – 52060058AE
Vehicle-Specific Part: Check Fitment $82.30 Add to cart Quick View -
Billet Spec Steering Wheel Cover, 14 Inch, Half Wrap Ring, Red Leather Wrapped – 29005
Not sure it fits? Ask us $86.30 Add to cart Quick View -
Crown Automotive Steering Gear Box, Power Steering, Gray, Steel/ Rubber, With 4-BOLT Mounting – 52002085R
Not sure it fits? Ask us $684.85 Add to cart Quick View