Tci Auto Trans Torque Converter, Streetfighter ®, For Use with GM 700R4 Transmissions, Street, 10 Inch Diameter, 3000 to 3400 RPM Stall – 243105
$908.89
Tci Auto Trans Torque Converter, Streetfighter ® – 243105
Description
Auto Trans Torque Converter; StreetFighter ®; For Use With GM 700R4 Transmissions; Street; 10 Inch Diameter; 3000 To 3400 RPM Stall; 30 Spline Input; Lock-Up Style; Without Anti-Ballooning Plate
Attributes:
- Condition: New
- Recommended Use: Street
- Transmission Type: 700R4
- Stall Speed: 3000 RPM To 3400 RPM
- Lock Up Style Converter: Yes
- Diameter: 10 Inch
- Balanced: Yes
- Input Shaft Spline Count: 30 Spline
- Crank Pilot Diameter: 1.703 Inch
- With Anti Ballooning Plate: No
Features & Benefits:
- Furnace Brazed Fins Increase Durability
- Needle Bearings, Hardened Pre Ground Pump Hub
- Higher RPM Launches
- Quicker Reaction Times, Lower Elapsed Times
- Better Low And Mid Range Power
- 1500 Plus RPM Increase In Stall Over Stock
- Limited 30 Day Racing Warranty And Limited 90 Day Street/Strip Supplier Warranty
About Product:
Designed with the street racer in mind, this Torque Converter benefits more radically prepared street machines (Those With Performance Cams, Aftermarket Carbs And Higher Compression Ratios) to bring the launch RPM in line with the performance enhancements. The StreetFighter® lets you take advantage of Horsepower gains found in higher RPM ranges. TCI® strives to produce the best Torque Converters in the industry. Part of the process involves ensuring that each unit is built to spec. Regardless of what category or price level it may fall into, every TCI® Torque Converter is triple tested during assembly. Once all the prep work on the component parts has been completed, the impeller is welded to the front cover. Immediately following this process, a pair of dial indicators are employed on a rotating table to verify that the impeller body and pump drive hub remain true. Each unit is then pressurized and subjected to a leak test to confirm the integrity of all the weld seams. Lastly, each unit is computer balanced to reduce annoying and potentially damaging drivetrain vibrations that would occur from an unbalanced Torque Converter. That’s triple tested so you can be confident you’re getting a Torque Converter that’s ready to roll.
Additional information
| Weight | 34 lbs |
|---|---|
| Dimensions | 14 × 13 × 7 in |
| Brand | TCI |
| Manufacturer Part Number | 243105 |
Vehicle Fitment
This part fits the vehicles listed below. Always confirm fitment for your exact vehicle before ordering.
This part is compatible with 1,407 vehicles.
| Year | Make | Model | Trim | Engine |
|---|---|---|---|---|
| Loading fitment... | ||||
Related products
-
Crown Automotive Axle Shaft Disconnect Actuator, For Use with Dana 30, With Vacuum Diaphragm/ Gasket/ Hardware – 4506116
Vehicle-Specific Part: Check Fitment $112.00 Add to cart Quick View -
Crown Automotive Clutch Pedal Adjustment Activation Switch, Plastic/Nylon, Black, Mounts on the Clutch Master Cylinder Rod – 56009047
Vehicle-Specific Part: Check Fitment $73.94 Add to cart Quick View -
Crown Automotive Clutch Linkage Pivot Ball, OEM Replacement – 52087542
Vehicle-Specific Part: Check Fitment $9.96 Add to cart Quick View -
Crown Automotive Auto Trans Shifter Cable, AW4/ 30RH/ Automatic Transmission, 50-1/4 Inch Overall Length – 52078700
Vehicle-Specific Part: Check Fitment $24.71 Add to cart Quick View