Fabtech Lift Kit Suspension, 6 Inch Front Lift, 3 Inch Rear Lift, With Rear Stealth Shock Absorbers, Black Components – K2371M
$2,920.25
Fabtech Lift Kit Suspension, 6 Inch Front Lift, 3 Inch Rear Lift – K2371M
Description
Lift Kit Suspension; 6 Inch Front Lift; 3 Inch Rear Lift; With Rear Stealth Shock Absorbers; Black Components; With Front And Rear Crossmembers/ Front Bump Stops/ Steering Knuckles/ Tie Rods/ Coil Over Spacers/ Skid Plate/ Stabilizer Bar Mounts/ Rear Lift Blocks And U Bolts/ Installation Hardware
Attributes:
- Front Lift Amount (IN): 6 Inch
- Rear Lift Amount (IN): 3 Inch
- Front Lift Type: Coil Over Spacer
- Rear Lift Type: Blocks And U-Bolts
- Maximum Tire Size: 37 x 12.50
- Shock Type: Hydraulic
- Wheel Backspacing (IN): 5.00
- Minimum Wheel Diameter: 20
- Wheel Offset (MM): 0
- Shocks: With Shocks In Kit
- Color: Black Components
Features & Benefits:
- 1/4 Inch Thick Steel Lower Control Arm Crossmembers Are Arched For Maximum Ground Clearance
- Welded Box Design Of These Crossmembers Provides Additional Strength To The Front Suspension
- Fabtech’s Extended Length Ductile Iron Steering Knuckles Provide Zero Bump Steer Throughout The Suspension Travel
- Oversized Tie Rods Are Provided To Replace The Stock Units That Are Designed To Handle Oversized Tires
- Factory Coilovers Are Relocated With Heavy-Duty Lower Mounts To Lift The Vehicle While Retaining The Stock Ride Quality
- Heavy-Duty Front Differential Skid Plate Is Constructed Of 1/4 Inch Thick Steel To Protect The Diff From Offroad Obstacles
- Extended Length Monotube Shocks Have A Nitro Carborized Piston Rod For Corrosion Resistance And Resist Rock Chipping
- Limited Lifetime Warranty
About Product:
Fabtech’s world-renowned IFS suspension design for the Ford F150 provides excellent drivability both on and offroad. There is zero bump steer throughout the suspension cycle that helps reduce driver fatigue while improving the overall drivability of the vehicle. The near-stock track width keeps the tires under the fenders for a clean appearance. Fabtech’s proprietary steering knuckle geometry provides an excellent lock to lock turning radius to maneuver in tight spots. Heavy-Duty 1/4 Inch thick steel crossmembers feature eccentric style alignment cams for easy adjustment. Triple front diff mounts reposition the differential for vibration-free operation at high speed. The factory coilover shocks are relocated from the bottom to allow for full steering while achieving 6 Inch of lift. At the rear of the vehicle, the factory 2 Inch block is replaced with a 5 Inch Block and u-bolt system. Fabtech has addressed all aspects of the suspension for proper wheel travel and lock to lock steering without over cycling.
Additional information
| Weight | 262.4 lbs |
|---|---|
| Dimensions | 45.5 × 14.5 × 13 in |
| Brand | FABTECH |
| Manufacturer Part Number | K2371M |
Vehicle Fitment
This part fits the vehicles listed below. Always confirm fitment for your exact vehicle before ordering.
This part is compatible with 38 vehicles.
| Year | Make | Model | Trim | Engine | Notes |
|---|---|---|---|---|---|
| Loading fitment... | |||||
Related products
-
Crown Automotive Rack and Pinion Mount Bushing, Steel/ Rubber, Black, Single – 52038783AC
Vehicle-Specific Part: Check Fitment $12.44 Add to cart Quick View -
Crown Automotive Body Mount Bushings, Black, Rubber – 52002008
Vehicle-Specific Part: Check Fitment $8.53 Add to cart Quick View -
Crown Automotive Steering Gear Box, Power Steering, Gray, Steel/ Rubber, With 4-BOLT Mounting – 52002085R
Not sure it fits? Ask us $684.85 Add to cart Quick View -
Crown Automotive Pitman Arm – 52060056AC
Vehicle-Specific Part: Check Fitment $62.54 Add to cart Quick View