ICON Vehicle Dynamics Lift Kit Suspension, Stage 1, 2-1/2 Inch Front Lift, 2-1/2 Inch Rear Lift, With Front and Rear Shock Absorbers IN Kit – K22011
$1,474.13
ICON Vehicle Dynamics Lift Kit Suspension, Stage 1 – K22011
Description
Lift Kit Suspension; Stage 1; 2-1/2 Inch Front Lift; 2-1/2 Inch Rear Lift; With Front and Rear Shock Absorbers In Kit; Black Components/ Gray Shock Absorbers; With Front And Rear Coil Springs/ Stabilizer Bar Links/ Installation Hardware
Attributes:
- Front Lift Amount (IN): 2-1/2 Inch
- Rear Lift Amount (IN): 2-1/2 Inch
- Maximum Tire Size: 35 x 12.50
- Front Lift Type: Coil Spring
- Rear Lift Type: Coil Spring
- Shock Type: Nitrogen Gas Charged
- Wheel Backspacing (IN): 4.75
- Wheel Offset (MM): 0
- Shocks: With Shocks In Kit
- Color: Black Components/ Gray Shock Absorbers
Features & Benefits:
- 2-1/2 Inch Lift Height
- 3 Inch Front, 2 Inch Rear Increase In Wheel Travel
- Improves On And Off-Road Ride Quality Over Stock
- Dual Rate Coil Springs With Lifetime Guarantee Against Sagging Or Breakage
- 2.0 Aluminum Series Shocks With Vehicle Specific Valving
- 100 Percent Bolt-On System Makes For An Easy Install
- “ICON 1K” Tested Under Rigorous Off-Road Conditions To Validate Tune, Performance, Strength, And Durability
- Limited Lifetime Warranty
About Product:
Through an accelerated testing process dubbed the “ICON1K” R&D program, ICON has logged over a thousand miles in the dirt pushing the JL to off-road extremes to identify limiting factors in OE components, develop products that remove these limits, and further extrapolate performance out of this vehicle. This 2-1/2 Inch suspension system has been tweaked, tuned, and revised several times over the course of this ICON1K testing in an effort to provide unparalleled ride quality and vehicle dynamics for everything from rock crawling to high-speed desert running. The ICON Vehicle Dynamics Stage 1 2-1/2 Inch Suspension System for the 2018-UP Jeep Wrangler JL is designed for the driver looking to drastically improve the performance and ride quality of their vehicle. The Stage 1 system is ICON’s entry level offering for Jeep enthusiasts looking to add lift height and wheel travel to their JL without breaking the bank. This system features 2-1/2 Inch lift dual rate coil springs, Vehicle Specific 2.0 Aluminum Series shocks, bump stop spacers, sway bar links, and all necessary hardware to complete the installation. With this combination of components, ICON was able to increase wheel travel numbers by over 30 Percent (3 Inch front, 2 Inch rear), redefining the potential of the 2018-UP JL. The Stage 1 system allows for fitment of 35 Inch tires when used with ICON’s recommended wheel specifications. For users looking to install 37 Inch tires, an optional extended bump stop spacer kit is available.
Additional information
| Weight | 68 lbs |
|---|---|
| Dimensions | 40 × 13.38 × 7.5 in |
| Brand | ICON |
| Manufacturer Part Number | K22011 |
Vehicle Fitment
This part fits the vehicles listed below. Always confirm fitment for your exact vehicle before ordering.
This part is compatible with 113 vehicles.
| Year | Make | Model | Trim | Engine | Notes |
|---|---|---|---|---|---|
| Loading fitment... | |||||
Related products
-
Crown Automotive Stabilizer Bar Link Bushing, Black, Rubber – 4782683AB
Vehicle-Specific Part: Check Fitment $8.35 Add to cart Quick View -
Crown Automotive Tie Rod End, Greasable, With Offset, Steel – 52060052AF
Vehicle-Specific Part: Check Fitment $154.95 Add to cart Quick View -
Billet Spec Steering Wheel Cover, 14 Inch, Half Wrap Ring, Red Leather Wrapped – 29005
Not sure it fits? Ask us $86.30 Add to cart Quick View -
Crown Automotive Stabilizer Bar Link Bushing, Black, Rubber – 4782681AB
Vehicle-Specific Part: Check Fitment $7.81 Add to cart Quick View